Personal Protective Equipment

Knitted arm protector with Kevlar® para-aramid short fibres offering cut resistance and protection against contact heat up to 100°C, with thumb slot for added wrist protection.

Oil-resistant work glove with three-quarter nitrile coating for mechanical protection, flexibility and comfort — ANSI/ISEA 105-2024 4 2 A1, EN 388:2016 3111A.

Disposable chemical-resistant glove with three-layer design for superior protection against aggressive chemicals, certified to EN ISO 374-1:2016 Type A.

Disposable nitrile glove with TNT™ Chemical Splash Resistance Technology for protection against chemical splashes, certified to EN ISO 374-1:2016 Type B and EN 388:2016.

Yellow/black barrier tape, 80 mm wide, 500 m roll, used to mark off areas of special danger.

Lady ESD work sock made from recycled PET, designed for women's feet. Antistatic, moisture-regulating, and extra reinforced at heel, footbed and toe.

Women's ESD work sock made from recycled rPET, designed for the shape and size of the woman's foot.

S3 ESD certified winter safety boot with cold-insulated outsole, warm winter lining, aluminium toecap and FlexGuard® composite penetration-resistant insert.

Stylish S3 ESD safety boot made of full-grain leather with warm winter lining, CI-certified cold insulation outsole, and extreme grip, durability, and comfort.

High S3 safety shoe with steel toe cap and steel anti-penetration insert, compliant with EN ISO 20345:2011.

Work sock with ventilation channels for optimal air circulation, ESD and No odor technology, and shock absorption.

Robust wall-mounted holder for the Cederroth 500 ml eye wash bottle (REF 725200), with automatic opening when the bottle is removed from the bracket.

Complete first aid kit contents for BHV (bedrijfshulpverlening) compliant with Dutch first aid regulations 2021 standard.

Blue, water-resistant detection plasters for food service and kitchen use (HACCP), standard size, 7.2 cm x 2.5 cm, box of 100.

Foil rescue blanket 210 x 160 cm, protects against heat (silver side) and cold (gold side) while providing insulation.

Detectable finger plaster 20x180mm, pack of 100, medical class I.

Cederroth Eye Wash 500 ml — neutralises the pH of the eye after splashes of alkalis and acids, with a faster effect than standard saline solution.

Lightweight disposable coverall made from breathable SMMS non-woven fabric, providing protection against airborne solid particles (Type 5) and light liquid sprays (Type 6).

Disposable SMMS coverall offering Type 5 dry particle and Type 6 reduced spray protection, antistatic EN 1149-5, with stitched seams and excellent breathability.

Disposable protective overall offering protection against particulate matter and light liquid splashes, with antistatic properties.

Lab coat with collar, elastic cuffs and finger loops, full-length open zip, no pockets — for partial body protection against particles and liquid hazards in laboratory environments.

Disposable protective sleeve offering antistatic properties and barrier protection against particles and liquid splashes, certified to EN 1149-5, EN 14126, EN 13034 Type PB 6, EN 1073-2, Type 5 and Type 6.

Disposable microporous laminate coverall offering Type 5 dry particle and Type 6 light liquid spray protection, with sealed bound seams and antistatic properties.

Balaclava-style protective hood made from the same durable, breathable material as the Chemdefend 250 series, offering particle and liquid splash protection with antistatic properties.

Antistatic overboot with PVC sole made from micropore polyethylene laminate on spunbonded polypropylene, offering protection against liquids, dust, and biological agents. Certified to EN 1149-5, EN 14126 Type PB 6B, EN 13034 Type PB 6, EN 1073-2, Type 5 and Type 6.

Antistatic protective overshoe offering protection against liquids, dust, and biological agents, certified to EN 1149-5, EN 14126, EN 13034 Type PB 6, EN ISO 13982-1 Type 5, and EN 13034 Type 6.

Lightweight disposable overshoe made of durable microporous PE laminate on SBPP, with elasticated entry and stitched seams for optimal fit and contamination protection.

Disposable protective coverall offering Type 5 dry particle and Type 6 light liquid spray protection with antistatic properties and a breathable back panel.

Chemical-resistant disposable coverall with taped seams, offering Type 3 and Type 4 protection against pressurised liquid jets and liquid saturation, plus Type 5, Type 6, and additional certifications for dust, light spray, radioactive particles, antistatic, biological hazards, and pesticides.

Chemical-resistant disposable coverall offering Type 3 and Type 4 protection against pressurised liquid jets and liquid saturation, with antistatic properties.

Chemical protective coverall with taped seams, offering Type 3 and Type 4 protection against strong liquid jets and saturation, plus Type 5, Type 6, and biological hazard protection.

Disposable chemical protection coverall with taped seams, offering Type 3 and Type 4 protection against strong liquid jets and saturation, plus Type 5, Type 6, and additional EN 1073-2, EN 1149-5, and EN 14126 approvals.

Full body fall arrest harness with dorsal and chest anchor points, 45 mm polyester webbing, certified to EN 361:2002.

11 mm semi-static kernmantel rope, Class A, certified to EN 1891:1998, for vertical use with compatible fall arrest devices.

11 mm semi-static kernmantel rope, Class A, certified to EN 1891:1998, for vertical use with compatible fall arrest devices.

Disposable PU foam earplugs without cord, SNR 38 dB, certified to EN 352-2:2002 and ANSI S3.19-1974.

Helmet-mounted earmuff providing hearing protection against continuous loud noise, SNR 30 dB, certified to EN 352-3.

FFP3 NR D filtering half mask with activated carbon layer and exhalation valve, protecting against solid and liquid particles and welding ozone. Certified to EN 149:2001+A1:2009.

Lumbar support belt providing lower back support during heavy lifting, repetitive movements, or prolonged standing.

Two-point chin strap with plastic hooks for secure helmet retention, compatible with Climax helmets.

Full body fall arrest harness with static electricity protection for use in potentially explosive atmospheres (ATEX), certified to EN 361:2002.

Full body fall arrest harness with ATEX certification for use in potentially explosive atmospheres, compliant with EN 361:2002.

Steel karabiner connector with automatic spring-loaded closure and manual locking barrel, rated to 23 kN MBL, CE certified to EN 362:2004 for fall protection systems.

Steel scaffold hook with automatic locking mechanism, designed for fall protection and restraining systems. Certified to EN 362:2004.

Energy absorber with absorption strap for use with a safety harness in fall arrest systems, certified to EN 355:2002.

Y-shaped energy absorber with integrated lanyard, tear-webbing energy absorber, swivel connector, and steel connectors — certified to EN 355:2002 for fall arrest systems.

Chin strap for safety helmets to prevent the helmet from falling, with polyethylene chin support and plastic hooks anchored to each end of the elastic band.

Climax 415-A welding face shield with 110x55 mm inactinic filter, designed to protect against welding radiation and incandescent particles. Certified to EN 166, EN 169, EN 175 and EN 397.

Electronic auto-darkening welding helmet for all welding processes from 5A (MIG/MAG, TIG/WIG, plasma) except laser and gas welding, with variable shade 9–13, certified to EN 175 and EN 379.

Polycarbonate face shield for helmet mounting, protecting against medium-energy impact from high-speed particles, drops and splashes. EN 166 / EN 397.

Polycarbonate face shield with yellow helmet, rated for medium-energy impact up to 120 m/s, optical class 1, compliant with EN 166 and EN 397.

Welding face shield with polycarbonate visor, protection grade 5, optical class 1, designed for oxyacetylene and oxy-fuel welding processes. Conforms to EN 166, EN 169, EN 175, EN 397 and EN 50365.

Aluminium anchor connector (Class A) with fully automatic locking and safety blocking mechanism, certified to EN 362:2004.

Safety helmet with toothed-wheel adjustment, protecting against falling objects and electrical discharges up to 1000V AC / 1500V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Industrial safety helmet with toothed-wheel adjustment, protecting against falling objects and electrical discharges up to 1000 V AC / 1500 V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Industrial safety helmet with toothed-wheel adjustment, protecting against falling objects and electrical discharges up to 1000 V AC / 1500 V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Safety helmet with toothed wheel adjustment, protecting against falling objects and electrical discharges up to 1000V AC / 1500V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Industrial safety helmet offering impact protection against falling objects and electrical insulation up to 1000 V AC / 1500 V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Safety helmet with toothed-wheel adjustment, protecting against falling objects and electrical discharges up to 1000 V AC / 1500 V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Safety helmet with visor and water rim, impact protection against falling objects and electrical protection up to 1000 V AC / 1500 V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Safety helmet with pinlock visor, certified to EN 397:2012+A1:2012 and EN 50365:2002, offering impact protection and electrical insulation up to 1000 V AC / 1500 V DC.

Safety helmet offering impact protection against falling objects and electrical protection up to 1000 V AC / 1500 V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Safety helmet with Pinlock visor protection, impact-resistant HDPE shell, electrical insulation up to 1000 V AC / 1500 V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Safety helmet with Pinlock visor, impact protection and electrical insulation up to 1000V AC / 1500V DC, certified to EN 397 and EN 50365.

Safety helmet with Pinlock visor, impact protection and electrical insulation up to 1000V AC / 1500V DC, certified to EN 397 and EN 50365.

Safety helmet with visor and water rim, impact protection against falling objects and electrical protection up to 1000 V AC / 1500 V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Integral ventilated goggles for protection against high-speed low-energy impacts, liquid drops and splashes, coarse and fine dust, and gas. Anti-fog and anti-scratch treatment. EN ISO 16321-1:2022.

Climax 545-A welding goggles with shade 6 inactinic glass filter eyepieces for oxyacetylene and oxyfuel welding processes, certified to EN 175 and EN ISO 16321-1.

Safety glasses with solar glare protection, low-energy particle impact resistance, and anti-scratch/anti-fog polycarbonate lens, certified to EN ISO 16321-1:2022.

Safety glasses with UV protection, low-energy particle impact resistance, anti-scratch and anti-fog polycarbonate lens, certified to EN ISO 16321-1:2022.

Panoramic safety glasses with clear polycarbonate lens, offering solar radiation protection and high-speed low-energy impact protection (F) at extreme temperatures (T).

A2 gas filter for organic vapours with boiling point > 65 °C, designed for use with Climax 731-S and 731-C masks and any mask with standard DIN thread (EN 148/1).

Combined screw-in filter offering protection against organic gases and vapours (A2), inorganic gases and vapours (B2), and solid and liquid particles (P3), certified to EN 14387:2004+A1:2008.

Combined screw-in filter offering protection against organic gases (type A) and P3 particles, designed for use with Climax 731-S and 731-C masks and any mask with a standard DIN thread (EN 148-1).

Combined gas and vapour filter offering protection against A, B, E and K type gases, compatible with Climax 731 and 731-C masks and any mask with standard DIN thread EN 148-1.

Combined respiratory filter offering ABEK2HGP3 multi-gas and P3 particle protection, compatible with Climax 731-S and 731-C masks via standard DIN thread (EN 148-1).

Combined screw filter offering ABEK2 and P3 protection against organic, inorganic, acidic and ammonia gases plus solid and liquid particles, compatible with masks 731-S and 731-C via standard DIN thread (EN 148-1).

P3 particulate filter designed for use with Climax 731-S and 731-C face masks and any mask with a standard DIN thread connection (EN 148/1).

Combination filter for organic gases and vapours (boiling point > 65 °C) and fine dust/aerosols, compatible with Climax respirators 755, 756 and 810, certified to EN 14387:2004+A1:2008.

Silicone half face mask compatible with Climax 755 and 756 filters, providing ABEK1P3 combined gas and particle protection, certified to EN 140:1998.

Silicone half mask compatible with 757-N filters via bayonet connection, offering protection against gases, vapours and particles. Certified to EN 140:1998.

Reusable half mask with A1 gas filter, protecting against organic gases, vapours and particles. EN 140:1998 certified.

Reusable half mask made of flexible thermoplastic rubber, compatible with Climax 760 filters for protection against gases, vapours, dust, mist and smoke. Certified to EN 140:1998.

Earmuff hearing protector with SNR 25dB, designed for continuous exposure to high noise levels. Certified to EN 352-1:2020.

Trauma prevention device with adjustable straps that relieves pressure on the thighs when suspended in a harness.

Full body fall arrest harness with sternal rescue anchor point, designed for work at height and rescue operations. Certified to EN 361, EN 1497, EN 358 and EN 813.

Panoramic safety goggle with colourless polycarbonate lens, protecting against mechanical risks, chemicals, dust, liquid drops, mists and UV/solar radiation. Certified to EN 166:2001, EN 172 and EN 170.

20-litre PVC carry bag, 100% waterproof, for storing fall protection systems and work equipment.

Tube-shaped duffel bag in PVC, 30 L capacity, without zippers — ideal for storing and transporting equipment.

Climbing helmet for work at height, EN 12492 certified, with ABS shell, EPS impact liner, gear-wheel headband adjustment and four-point textile chinstrap.

Climbing helmet for work at height, ABS shell with UV stabilisation, EN 12492:2012 certified, with gear wheel headband adjustment.

4-point chin strap compatible with Climax Curro helmets, made with polyethylene and polyester webbing with 15 mm tape.

Earmuff designed for optimal protection against continuous loud noise exposure, ideal for full-time work in noisy environments. SNR 28 dB, certified to EN 352-1:2002.

Earmuff designed for optimum protection against continuous loud noise exposure, ideal for full-time work in noisy environments. SNR 32 dB, certified to EN 352-1:2002.

Dorsal extension lanyard for fall arrest harnesses, EN 354:2010 certified, 40 cm polyester webbing with protected terminations.

A1 gas filter for organic gases and vapours with boiling point > 65 °C, compatible with Climax half masks mod. 755, 756 and 810, certified to EN 14387:2004+A1:2008.

Combined gas and particle filter ABEK1P3 for Climax half masks 755 and 756, protecting against gases, vapours, dust, mist and smoke.

A2 gas and vapour filter for organic gases and vapours with boiling point > 65 °C, bayonet connection, certified to EN 14387:2004+A1:2008 and Regulation (EU) 2016/425.

Gas and vapour filter ABEK1 for use with Climax half masks mod. 757, 800 and full mask 732-N, certified to EN 14387:2004+A1:2008.

A1 gas filter for use with Climax half mask model 761, protecting against organic gases and vapours with boiling point > 65 °C. Certified to EN 14387:2004+A1:2008.

Gas filter for Climax half mask 761, K1 class protection against ammonia and organic ammonia derivatives, certified to EN 14387:2004+A1:2008.

P3 particle filter for use with Climax half mask model 761, offering 99.95% filtration efficiency against solid and liquid aerosols. Certified to EN 143:2000+A1:2006.

Combined filter set for the Climax 800 half-face mask offering protection against organic gases and vapours (A2) and solid and liquid particles (P3).

Climax Filtro 760 760 B1E1 filter for industrial respiratory protection against the contaminant group stated on the cartridge, with threaded connection and EN-certified performance.

Class 3 full face mask made of natural rubber with panoramic polycarbonate visor, 5-point harness and EN 148-1 threaded filter connection.

Class 2 full-face mask made of silicone with panoramic polycarbonate visor, 5-point harness and EN 148-1 filter connection for use with gas, dust and combined filters.

Class 3 full face mask with panoramic polycarbonate visor, EN 148-1 (Rd40) filter connection, compatible with Climax 725 filters. Certified to EN 136:1998 and EN 166:2001.

Guided type fall arrester for rope access, hands-free use during ascent and descent, certified to EN 353-2, EN 358 and EN 12841-A.

Filtering half mask with integrated A1P3 combined filters for protection against organic vapours and fine particles, designed for use with welding shields, face shields and safety glasses.

Filtering half mask with integrated A2P3 combined filters for protection against organic vapours and FFP3 particles, EN 405:2001+A1:2009.

Filtering half mask with integrated ABEK1P3 combined filters for protection against gases, vapours and particles, designed for use with welding shields, face shields and safety glasses.

Reusable half mask made of soft thermoplastic rubber with two side filter connectors, compatible with Climax 755 and 756 filters. Certified to EN 140:1998.

Reusable half mask made of soft thermoplastic rubber for protection against gases, vapours, dust, mist and smoke. Certified to EN 140:1998.

Half mask designed for maximum protection against gases, vapours, dust, mist and smoke; compatible with Climax 757-N filters, EN 140:1998.

Half mask designed for protection against gases, vapours, dust, mist and smoke; compatible with Climax 757 filters, EN 140 certified.

Full body fall arrest harness with dorsal anchor point, adjustable chest and leg buckles, certified to EN 361:2002.

Full body fall arrest harness with dorsal (A) and chest (A/2) anchor points, tested for 140 kg, certified to EN 361:2002.

Full body fall arrest and work positioning harness with dorsal and chest anchor points, certified to EN 361:2002 and EN 358:2018.

Full body fall arrest and work positioning harness with dorsal and frontal anchor points, padded back and leg loops, certified to EN 361:2002 and EN 358:2018.

Full body fall arrest harness with dielectric protection, certified to EN 361:2002 and EN 358:2018, designed for work on electrical grids and telecommunications.

Full body fall arrest harness with dorsal and chest anchoring points, padded back, and material-holding rings. Certified to EN 361:2002.

Full body fall arrest harness with work positioning belt, dorsal and chest anchor points, padded back and leg sections, certified to EN 361:2002 and EN 358:2018.

Safety helmet with toothed wheel adjustment, protecting against falling objects and electrical discharges up to 1000V AC / 1500V DC, certified to EN 397:2012+A1:2012 and EN 50365:2002.

Helmet adapter compatible with Climax 5-RS, 5-RG, Tirreno TX, Tyrreno TXR, and Cadi helmets.

Helmet adapter designed for Cadi helmets, ensuring secure attachment and compatibility.

Lightweight climbing helmet with excellent ventilation, In-mould EPS/polycarbonate construction, and headlamp clips — certified EN 12492:2012 and EN 397:2012+A1:2012.

Lightweight ventilated helmet for work at height, EPS shell with In-mold polycarbonate cover, certified to EN 12492:2012 and EN 397:2012+A1:2012.

Temporary horizontal lifeline system with 20 m polyester webbing, designed for use with a fall arrest harness and energy absorber. Certified to EN 795:2012 + CEN/TS 16415:2013.

180 lm LED headlamp designed for use with Climax helmets, featuring three brightness levels and two lighting modes.

Y-shaped lanyard made of two semi-static polyamide ropes, 2 m length, with three steel directional connectors — EN 354:2010 certified for fall arrest systems.

Anchoring lanyard kit with polyamide semi-static rope (11 mm), two connectors, and red wear indicator — EN 354:2010 certified.

PVC briefcase for storing fall protection equipment and work tools, 32 x 40 x 18 cm, black.

Guided type fall arrester for vertical movement on rope, automatic locking on fall, certified to EN 353-2:2002.

Mobile rescue tripod with 20 m winch for confined space access and fall arrest protection, certified to EN 795:2012 Class B and EN 1496:2006 Class A.

Adjustable positioning lanyard with 11 mm semi-static polyamide rope, metal length adjuster and red polyamide thimble. Certified to EN 358:2018.

Retractable fall arrester with 10 m galvanised steel cable, automatic inertia braking, for vertical and horizontal use. Certified to EN 360:2002.

Retractable fall arrester with automatic inertia braking for vertical and horizontal use, 15 m galvanised steel cable, certified to EN 360:2002.

Retractable fall arrest device with automatic inertia braking system, integrated energy absorber, and 2.5 m polyamide webbing lanyard. Certified to EN 360:2002.

Retractable fall arrester with 20 m galvanised steel cable, automatic inertia braking, for vertical and horizontal use. Certified to EN 360:2002.

Retractable fall arrester with 30 m galvanised steel cable, automatic inertia braking, energy absorber, and swivel hook connector. Certified to EN 360:2002 and RFU CNB/P/11.060.

Retractable fall arrester with 6 m galvanised steel cable, automatic inertia braking, for vertical and horizontal use. EN 360:2002.

Energy absorber with integrated semistatic lanyard and two steel connectors, designed for use with a fall arrest harness in accordance with EN 355:2002.

Energy absorber with integrated elastic lanyard and two connectors, designed for fall arrest systems in accordance with EN 355:2002.

Y-shaped energy absorber with integrated lanyard and connectors, designed for fall arrest systems in accordance with EN 355:2002.

Polyamide sling, 19 mm diameter, 1.5 m length, for anchoring lifelines, temporary installations and self-retracting systems.

Lightweight bump cap offering protection against light impacts, compliant with EN 812:2012 industrial impact protection standard.

Polyester tool lanyard with wrist strap and connector — prevents dropped tools and protects people working at lower levels.

Reusable gas and particle filter offering A2 and P3 protection, designed for use with Climax half masks mod. 757 and mod. 800 and full face mask 732-N, certified to EN 14387:2004+A1:2008.

Combined gas and particle filter offering ABEK1 and P3 protection, designed for use with Climax half masks mod. 757 and mod. 800 and full face mask 732-N, certified to EN 14387:2004+A1:2008.

Reusable P3 particle filter for use with Climax half masks mod. 757 and 800, and full face mask mod. 732-N. Certified to EN 143:2000+A1:2006.

Replacement sweatband for Climax 5-RS and 5-RG safety helmets.

Chlorinated natural rubber glove, heavy weight, flock lined, Type A chemical protection, certified to EN ISO 374-1:2016+A1:2018 and EN ISO 374-5:2016.

Lightweight Type 5-B and 6-B chemical protective coverall made of flash-spun high-density polyethylene, with excellent barrier against fine particles and fibres up to 1 micron, antistatic treated, no silicone added.